8" Jointer - 2 HP 1 Ph 230V - Helical Cutterhead - 60HH
Produktdetails
| Artikelnummer | 233000499 | Erscheinungsdatum | 2026/06/21 | Listenpreis | €628.87 | Modellnummer | 233000499 | ||
|---|---|---|---|---|---|---|---|---|---|
| Kategorie | |||||||||
If you have a need for accuracy, this Powermatic 60HH 8" Jointer with its Helical Cutterhead will meet those needs while providing unique, user-friendly functions.
The infeed table lever can be used to rapidly position table height, then the handle rotated for fine-adjustment of cut depth. Fence tilting is accomplished by a worm gear system, smoothly operated by a simple handwheel. The tables provide 73" long extended support. A non-mar insert in the fence protects the table from scratches during adjustments. The operating switch is mounted high so you can reach it easily, and the push blocks have a magnetic base so they can be stored on any metallic surface for instant access.
Features
- Helical cutterhead with 4-sided carbide inserts provides smoother, quieter cutting and a superior finish
- Extra-long tables are mounted on dovetailed ways for extended workpiece support
- Adjustment lever offers quick infeed table positioning and fine-tuning of cut depth
- Switch is mounted high for operator convenience
- Handwheel operated worm gear system for smooth fence tilting
- Magnetic push blocks can be stored on the machine within constant reach
- Non-mar fence insert protects table surface
Specifications:
- Motor: 2HP, 1PH, 230V, 9A
- Number of Knives: 54
- Helical Knife Size (L x W x T) (In.): 15 x 15 x 2.5
- Cutterhead Speed (RPM): 7,000
- Cutting Capacity (W x D) (In.): 8 x 1/2
- Table Size (L x W) (In.): 73 x 8-1/2
- Table Height from Floor (In.): 32
- Infeed Table Length (In.): 35-1/4
- Outfeed Table Length (In.): 35-1/2
- Fence Size (L x H) (In.): 38 x 4-3/4
- Fence Tilt (Deg.): 45 Forward, 45 Backward
- Fence Positive Stops (Deg.): 45, 90, -45
- Dust Collection Minimum CFM Required (CFM): 450
- Dust Port Outside Diameter (In.): 4
- Recommended Circuit Size (Amps.): 20V
FAQs
What makes the helical cutterhead better?
A helical cutterhead uses multiple carbide inserts to produce smoother cuts with less tear-out and lower noise. It also allows you to rotate inserts instead of replacing full knives, extending tool life.
How often do the tables need adjustment?
The tables are designed to stay aligned with minimal adjustment once properly set up. Occasional checks are recommended, but frequent tuning is typically not needed.
Shipping / Billing Information
All shipments must be inspected and any damage reported within 3 days of receipt.
Address corrections and cancellations may not be possible once order is submitted. Requested changes may incur additional charges.
This product ships direct from the manufacturer:
- Your order will ship in 4 -7 approximately business days.
- This product is considered special order. Your account will be charged when you place your order.
- Express or overnight shipping is not available for this product.
- Ships by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.
Return Information
All returns must be pre-approved. Any non-warranty returns must be unused and in original packaging. A 25% restock fee will apply. Customer pays return freight. Please call our Customer Service Dept. at 1-800-535-4482 with any return questions.
Warranty Information
Because this item is purchased and shipped directly from the manufacturer, their warranty supersedes any offered by Woodcraft.
Korrektur der Produktinformationen
Wenn Sie Unvollständigkeiten oder Fehler in den Produktinformationen auf dieser Seite bemerken, nutzen Sie bitte das Korrekturformular unten.
Korrekturanfrage